I’ve got a audio/tech question, maybe someone here might have some insight into.

I’m in need of noise cancellation for various and sundry reasons. i own a pair of BOSE ANC headphones which are tits, but have been looking for a pair of GOOD ANC earbuds that don’t cost $300 bucks, and had an idea that all ANC appears to be, when you break it down, is sound that the earphones/earbuds produce which bounce around in the ear canal and hit the ear drum in certain ways as to “cancel” out various types of background noise.

Again the ANC on my BOSE are amazing. Does anyone know, or have even heard of (no pun intended) anyone who has produced “noise cancelling” sound files?

It seems as if noise cancelling hardware like earphones are producing sounds that cancel out noise, mp3/flac files of “noise cancelling” sound could be on offer somewhere.

Dunno, figured i’d ask. Hope this is the right place to do that, and I’m not breaking any rules, I didn’t know where else to post this.

  • Adam@doomscroll.n8e.dev
    link
    fedilink
    English
    arrow-up
    57
    ·
    6 months ago

    The sound produced by ANC is the exact 180 degree inverse (or as near as possible) of the incoming bad noise.

    It’s produced in realtime by dedicated signal processors and requires mic arrays feeding in the sound. The quicker your processing pipeline the better the match is and the more powerful the effect is.

    There’s no prerecorded sound that would work.

      • venusaur@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        edit-2
        6 months ago

        Yup not possible. Sound is waves. Think of a sine wave that goes up and down. Noise canceling works by canceling the peaks and valleys of a sound wave with inverted valleys and peaks. If the peak is +1 for example, a sound wave with a valley of -1 played at the same time would cancel it out. This is simplistic terms of course.

        The sound of your environment is constantly changing. If you wanted a static audio file to cancel out noise you would have to play some customized white noise. Not the effect you’re looking for.

        Just extra context. You’ll need ANC buds. Heard Sony is good. Good luck!

      • Adam@doomscroll.n8e.dev
        link
        fedilink
        English
        arrow-up
        1
        ·
        6 months ago

        Yes. On older generation/cheaper ANC this is perceived as increased “pressure”. It doesn’t seem louder but the physical sensation of loudness is there.

        • laurelraven@lemmy.blahaj.zone
          link
          fedilink
          English
          arrow-up
          1
          ·
          6 months ago

          That actually explains the sensation I have with headphones provided by my work, I want to like them but the sensation is kind of unpleasant

  • Boozilla@lemmy.world
    link
    fedilink
    English
    arrow-up
    16
    ·
    edit-2
    6 months ago

    The A in ANC stands for Active. It is actively listening to ambient noise in your environment to cancel it out with a waveform tailored to do so in real time. If the noise in your environment is very static (like a hum or whirring) it might be possible to embed a cancelling sound in the audio file. But it’s likely it still won’t line up properly to really cancel it. It’s more likely to cause a worse sound because of being out of phase (like two leaf blowers going at the same time).

    I hope that makes sense.

    • downpunxx@fedia.ioOP
      link
      fedilink
      arrow-up
      2
      arrow-down
      1
      ·
      6 months ago

      it does, appreciate the response, i’m just trying to find a way to cancel noise using any ole earbuds to sleep with, and even the top of the line anc earbuds don’t hold a candle to over the ear anc headphones

      • czardestructo@lemmy.world
        link
        fedilink
        English
        arrow-up
        12
        ·
        6 months ago

        So I work for Bose. ANR ear buds are notably better than ANR headphones because they totally block your ear and adjust the ANR based on a microphone literally inside your ear. It records what is heard in your ear and cancels it, our latest buds are uncomfortably good at this. I find the absolute quiet a bit unsettling.

        But to your question, you just want quiet while you sleep? What about good old foam ear plugs? They work fairly well when put in far enough.

        • downpunxx@fedia.ioOP
          link
          fedilink
          arrow-up
          2
          arrow-down
          1
          ·
          6 months ago

          thanks, i use earplugs all the way up in there, and they block pretty much everything except movement, which isn’t sound per se, but it is vibration, and that seems to be silenced by my QCII headphones which I’ve been wearing to bed for a while now, they block pretty much everything and I’m not woken up by my upstairs neighbors walking abound on their floor/my ceiling like i am when i’ve got ear plug in. iv’e tried the bose qcii earbuds and the sony 1000xm4, and in my experience neither of them hold a candle to my bose qcii over the ear headphones in carpetting of sound. i figured if there was a general “sound cancelling” frequency someone somewhere at sometime might have recorded it as a mp3 or flac and i could try to play it from any old earbuds whilst i slept, but it seems that’s not technically how noise cancellation functions, but i do appreciate your response, being an expert, thanks again

          • czardestructo@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            ·
            6 months ago

            Im wondering if the passive attenuation of your headphones is doing more work than the ANR system is? Regardless sound is perception and that’s all that matters. I think using any ear bud, headphone or even a speaker with Brown Noise playing loudly is likely the only sure way to completely block out your perception of all noise. Or just take some gummies and turn your brain off :)

          • czardestructo@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            6 months ago

            The latest out in the world, the Quiet comfort ultras. Once you find the correct sized stability band and ear tip sizes you have two exceptional gaskets to block out the world. They work amazingly well.

        • solrize@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          6 months ago

          the absolute quiet

          WANT. I didn’t know that existed now. Best I’ve been able to do is foamies, that are better than nothing, but still let in a lot of sound. I will go look for new Bose IEM’s. Thanks.

          Added: Bose QuietComfort Ultra Earbuds, I think. I’ll see what I can find out. 6 hour runtime is a bit unfortunate though, not enough to get through a work day.

          Btw, a lot of the blurb about these is about music playback quality and I don’t want that at all. No music, just quiet. If they are 10db quieter at speech frequencies than typical 32db NRR foamies then that is probably worth the $250 to me. The amount of productivity I lose to office chatter distraction exceeds that in like no time.

          Is there a reasonable way to replace the batteries once they crap out? Frankly I’d be fine with a wired version.

      • pitaya@lemm.ee
        link
        fedilink
        English
        arrow-up
        2
        ·
        6 months ago

        You could try playing white noise through normal earbuds, it might block some of the noise. It wouldn’t be as effective as noise cancelling, but it’s worth trying

      • Donjuanme@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        6 months ago

        Overwhelming the noise is another option, a white noise soundtrack might be a decent bet. Otherwise you’re going to want to go with ear plugs.

  • stealth_cookies@lemmy.ca
    link
    fedilink
    English
    arrow-up
    9
    ·
    6 months ago

    Do you want to just block all sound or do you want the extra features that come with active noise cancellation headphones like speech passthrough? What you are proposing doesn’t exist because it makes no sense, active noise cancellation is done by recording the audio outside the headphone, inverting the amplitude and attempting to align the phase to cancel it out in real time.

    In reality active noise cancellation only works for more or less constant sounds below 1000Hz, anything higher than that and the headphones block exactly as much noise as any other pair of sealed headphones.

    You will get better noise reduction with IEMs than headphones, deep insertion headphones like Etymotic beat the pants off Bose for noise isolation at every frequency, are cheaper, and as a plus sound better than any noise cancelling set you can buy.

  • TimeSquirrel@kbin.social
    link
    fedilink
    arrow-up
    4
    ·
    6 months ago

    You need the live background noise to produce an inverted sound wave which will cancel it out. You don’t have that in a piece of data or software.

  • SuperJakish@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    edit-2
    6 months ago

    There have been a lot of ANC responses focusing on the A (active) part. There are two parts to nose cancellation: active and passive. I agree ANC are sweet and all… The other comments have that covered.

    If you’re interested in exploring a potentially low cost alternative to expensive ANR headphones or earbuds… Know that there are two parts to noise cancelling: active and passive. Passive nose cancelling is how much the headphones or earbuds reduce the outside noise before the active part needs to step in.

    SO, an option I haven’t seen discussed yet would be to get some standard low cost earbuds and get some over-ear ear muffs to put around them.

    Edit: literacy is for everyone… I didn’t see the bit about using this for sleep. Over ear muffs plus earbuds wouldn’t be very comfortable. Another option might be just finding some noise sounds you prefer over the nose you like. There are different standard noises… White noise, pink noise, brown noise… These might help make the frequency of unwanted sound your looking to block. This is a link related to noise colors after a quick search: https://www.hatch.co/blog/exploring-color-noises-for-better-sleep-with-hatch

    • quinkin@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      6 months ago

      Along these lines though when I did a lot of wood cutting I would buy the foam ear plugs, cut them shorter then use a hole punch to create a centre through hole that fit my earbuds. Replacing the stock rubber/silicon pads.

      I would then compress the ear plugs with my fingers like you normally would and slip the earbuds in.

      I would guess the earplugs efficacy was slightly reduced but it let me listen to music and podcasts while slinging a chainsaw for hours at a time without having to have ear damaging sound levels. I always used a helmet and earmuffs over the top for extra isolation.

    • downpunxx@fedia.ioOP
      link
      fedilink
      arrow-up
      1
      arrow-down
      1
      ·
      6 months ago

      thanks, if they only made hatch sleep earbuds (which also work as regular earbuds normally) i’d order them today. bose makes a pair of sleep earbuds, but they’re like 300 bucks, and they don’t cancel sound so much as play prerecorded sleeping sounds (seemingly like these hatch speakers do, which i can’t image work anywhere near as well as in in ear canal solution), and the bose “sleeps” or whatever can’t be used as normal earbuds to watch tv or listen to music or make phone calls, so, yeah, but appreciate the thoughtful response

      • kender242@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        6 months ago

        Have you looked into bone conduction headphones?

        Fidelity goes up (!) when you plug your ears. I use them in server rooms and on my bike (sans the earplugs).

        Aftershocks is a good brand, basically anything with a titanium band.

  • Donjuanme@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    6 months ago

    You’re asking for twice as much noise into your ears?

    I’m certain there are recordings of background noise, but none of it will do what you’re asking. It’d be like trying to cancel a recording of your voice by talking over it. A fun experiment to get the grandkids to do when they go home. Better yet, on the car ride home.

  • taaz@biglemmowski.win
    link
    fedilink
    English
    arrow-up
    2
    ·
    6 months ago

    Afaik you have to replicate the same wave but in opposite “direction” (up/down sinus) to cancel out incoming sound so any anc earbuds have to have microphones and are dynamically shaping the sound.

  • LanternEverywhere@kbin.social
    link
    fedilink
    arrow-up
    2
    arrow-down
    1
    ·
    edit-2
    6 months ago

    You’re putting the cart before the horse. Tell us the specific situational problem that you’re trying to solve. Like what ultimate end result are you trying to achieve.

    That way we can help you achieve what you’re actually trying to achieve

  • Zurgo@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    1
    arrow-down
    1
    ·
    6 months ago

    I’ve had a couple of good experiences with budget ANC buds, I used scarbir.com for his budget reviews, especially like that he assesses their phone call quality.