Edit: It is! I got the WiFi replaced and functional.

I need a confirmation that this is an accurate diagram, I have a A+E-key WiFi adapter, and I need to use it to replace a E-key WiFi adapter. I cannot find much information about compatibility, and need some confirmation before I stick my adapter in a type-e slot.

  • over_clox@lemmy.worldEnglish
    52·
    4 months ago

    Be very wary of the staggered pins in the diagram. I don’t trust the diagram.

      • over_clox@lemmy.worldEnglish
        24·
        4 months ago

        I’m not entirely sure myself with current tech, but when we got our first external adapter for SSD drives for MacBooks, the connector was made so sloppy that you’d literally have to manually make sure it was aligned properly in the slot.

        There was like half a millimeter of slop in the slot where if you inserted it incorrectly, everything would lose its magic smoke…

        • infeeeee@lemm.eeEnglish
          52·
          4 months ago

          You seem to love spreading misinformation on the web. Why are you commenting 4 times if you are not familiar with the topic?

          This is an m.2 connector. You have to secure it with a screw on the other side. It’s nearly impossible to mess it up.

          Apple frequently uses proprietary connectors, I don’t know which one you are reffering to. I won’t guess because I’m not very familiar with all apple connectors.

          You don’t have to comment on a topic if you are not familiar with. Please stop.

          • over_clox@lemmy.worldEnglish
            1·
            4 months ago

            Why is the diagram incomplete? It shows both sides of the socket, but only one side of the card. Are the pins really staggered like that?

            I never trust incomplete diagrams, and I’m not finding a proper diagram that shows both sides to confirm or deny anything.

            • infeeeee@lemm.eeEnglish
              5·
              4 months ago

              It’s a strange diagram but shows what you have to know. If you ever seen different keyed m.2 cards, you should understand this. The important thing is the location of the keys, the notch. All m.2 cards has an ‘up’ and ‘down’ side, it shows only the ‘up’ side. You have to look inside the receptor to see the pins, that’s why it shows both sides, it’s not possible to see one side only on the receptor as they are in a plastic casing. Usually you can’t see the pins on the mobo, only the key.

              You can see a similar diagram on wikipedia, both sides of receptor, top side of card:

              https://upload.wikimedia.org/wikipedia/commons/thumb/e/ed/M2_Edge_Connector_Keying.svg/560px-M2_Edge_Connector_Keying.svg.png

              The offset you were writing about doesn’t matter, it actually helps. You can’t accidentally insert the card upside down. The location of notches also help with this, as not all possible notches used yet, but in the future it could change.

              These connectors are really small. The receptor is similar how sodimm connector works, but smaller. Are you also afraid about inserting a ram in an laptop? It’s basically the same.

              Read more about the connector in wikipedia, I’m really happy this slowly replaces sata, msata, mpcie and even pcie in current pcs.

              https://en.wikipedia.org/wiki/M.2