Maybe for the generic cat/dog image sharing boards but niche topics like machining are still thriving.

I wonder if that shares the same physics as silvent’s compressed air guns.

Silvent’s air nozzles reduce the sound level when blowing with compressed air compared to blowing through open pipes. This is due in part to the reduction in noisy turbulence from using Silvent’s air nozzles, and also because of the nozzles’ special design. Silvent’s air nozzles pass the compressed air through small holes and slots, which raises the sound to frequencies beyond what the human ear can perceive. This allows us to make blowing with compressed air both quiet and efficient.

Could use an even quieter compressed air gun

https://www.newegg.com/p/N82E16826100006

Neural Impulse Actuator or brain-computer interface.

Just because you never heard of it doesn’t mean it hasn’t existed…

released in 2008

https://www.newegg.com/p/N82E16826100006

You don’t even need to be inserting probes to be able to do that…

OCZ had this ‘toy’ out in 2008.

https://www.newegg.com/p/N82E16826100006

one of the reviews…

Ultra-sensitive, excellent response time. Partial hands free gaming. Cool looking blue LED glow from interface box. This is the future of computer user interface. While designed primarily for FPS games, works exceptionally well with MMOs. Makes Crysis WARHEAD and FarCry 2 a joy to play. As a disabled person, this unit has allowed me to game with all the “normal” folks on the same level.

OCZ back in the day (2008) had a brainwave game controller… didn’t need surgery for that.

https://www.newegg.com/p/N82E16826100006

A couple old metrology equipment dated back from the 80s I still use calls them ‘mil’. It’s got dual dials for mil/mm. Gets me confused sometimes because the gauge can go down to couple millionths of an inch/couple 10s of nanometers.

LVDT for those curious.

If Red Bull can be successfully sued for false advertising from their slogan “It gives you wings”, I think it stands that Tesla should too.

Semi-related note… displayport cables can cause a no-boot condition too. I think it was the existence of Pin#1. I had to duct tape that one pin and my computer finally booted up.

Is it surprising that a publicly traded company is going to drive down quality to meet (or in spirit areospace’s case - attempt to make) profits?

The union also has clashed with Spirit over whether machinists should ever be responsible for checking their own work. Workers say having separate inspectors sign off on individual work is critical for quality control; Spirit and Boeing executives say that technological advances have reduced the need for separate inspectors in some cases.

Bad bad idea. Do not let machinists sign off on a inspection report. The incentive to hide mistakes is far too great.

I wish the article gave better explanation to how hard it is rather than just stating that it’s not brittle… Could revolutionize the cutting tools industry if it’s harder than cubicBoronNitride (CBN).

Ohhh interesting, just grabbed it on F-droid. I’ll be playing around with this for a while.

Most, if not all, aerospace tools that take a measurement requires periodic calibration and assurance that the tool is performing to spec.

There can be thousands of unique tools that must pass through its own respective calibration process and documentation. Micrometers, calipers, torque wrenches, and even scales.

Having a networked tool can save the hassle of operators mis-reading or just plain ignoring the calibration sticker. Also, knowing the “location” of the tool on an inventory sheet isn’t quite like knowing which side of a 747 for the wrench that is due for calibration.

Also this is just me hypothesizing… I presume there are a number of other benefits like automated logging of torque values for every single bolt installed with such tool. When the FAA audits for installation information regarding a single screw on a plane’s 3rd row window side infotainment system’s upper left mount… The data is easier to find.

This is all part of “industry 4.0” connected manufacturing for more efficient and lean manufacturing. Collect and process any data you could ever want to make the decisions for a manufacturer to do more with even less.

Clear sarcasm getting blasted.

Poe’s law says otherwise. Plenty of goof-balls here that would make such a claim boldfaced.

But per capita Sweden has more houses with assault rifles (literally military provided rifles to national service citizens) but no mass shootings there?

What does a person in Sweden have to do to possess a gun? Additionally, what is their policy on ammunition?

we’ve just lost the innovations that come with running that of wider sector

I’d argue that is not the case at all since manufacturing innovation is a commodity sold to the global market. See manufacturing trade shows. The tech is available, the skilled labor doesn’t exist in plentiful numbers to exploit such tech readily.

Some have even argued that because America’s software and internet sectors have been so lucrative, talent has been diverted away from older industries.

Please just say the quiet part loudly. Wages in manufacturing are disproportionately lower than other jobs with much less skill required. Tool and die machinists in socal have wages close to McDonald’s/Costco workers.

Sorry but how is grinding a punch form within .004mm, (dis) assembling stamping dies with incredible complexity for 10hrs a day without any procedural error premitted comparable with food assembly… One could put the lettuce before the pickles and no one would bat an eye. Put the wrong die in a station and production halts for hours costing hundreds of thousands of lost profits.

I believe the same can be said about construction as well.

Naturally, making physical goods rather than virtual ones mean less margins but of course the C-level executives must have their billion/multimillion salary bonus every year… Wonder what barrel they scrape all that extra money from…hmmmmmmmmmmmmmmmmmmmmmmmmmmm

Haven’t read the entire thread so apologies if you’ve already provided this information but could you show us a picture of your monitor’s osd with the input source information? That should tell you right there that your input device isn’t sending out what you desire.

Also if you don’t have a >144hz option in your os’s display options, try disconnecting any other monitors you have plugged in.

What cable and interface are you using?

I lived in one of ‘those homes’ once… All 5 bedrooms and the garage which I stayed in was at least 1000 a month. And it was bare minimum amenities. One refrigerator shared with everyone, stove top was broken the entire time, one restroom and shower, and half of the folks had no idea how to clean dishes.