It’s got RGB. Man, it must do so much FPS (fabric per second).
It’s got RGB. Man, it must do so much FPS (fabric per second).
The return of mustaches.
I wouldn’t mind them if they didn’t BREAK MY REMOTE’S PLAY BUTTON.
Thanks! Hopefully my new tires are more resilient
Leftover powder on the road is a different beast. It’s often mixed up with a little bit of sand, and it’s been crushed into a powder that doesn’t feel like natural snow at all. It doesn’t stick and it slips like fine sand. Not a fun time. A little pile of 2-3 cm of the stuff was enough to almost make me completely lose control last year. Scary stuff.
Hmm, i see.
I’ll have a new bike with different winter tires this year but last year my bike would get dangerously destabilized by the smallest amount of leftover powder snow trail from the snow clearing machines, so I stayed well away from uncleared roads.
But for one, as you say, that was forgetting about how uncleared snow is not the same, and also, new tires this year.
I’ll give it a try next time. It’ll probably be safer to avoid the cars for a little bit longer anyway.
Depending on the internal design of the phone, maybe.
But batteries are rectangular and they can’t put them EVERYWHERE. There are places (such as near the USB port) where you can’t really put battery no matter what because there have to be things that would interfere with the rectangular battery.
So it might have an effect, but not necessarily, depending on design, and it might be smaller than you’d think.
I live in the city though. It could easily recommend I use the street if it knew that winter is a thing. And uh… Idk, maybe cycling through deep snow works on a fat bike, but with a normal bike with winter tires like mine, I can’t just blast through 30+ cm of uncleared snow.
Often Google tries to have me cycle on a trail that has zero snow removal in the winter. So there’s that.
Well you don’t say it draws 2 kWh at idle. You say it draws 2 kW at idle. While that is incredibly inefficient, it means that for every hour the device is idle, it draws 2 kWh of energy.
Oh yeah battery size isn’t sufficient to fully gauge battery life. You need to know power draw to calculate that. And it’s good to get battery life ratings from reviews. Great. It helps a lot.
But it doesn’t mean we shouldn’t get good, comparable physical specs.
Kinda like processors. Gigahertz and core counts are far from telling you everything, but it doesn’t mean it should be abstracted into some weird unit.
What? They draw power, not energy?
Energy is just the product of power and time. And just like amperage, the power draw of a device varies.
And this should be obvious, but what makes more sense to an electronics engineer doesn’t matter one bit to the end user. And the end user doesn’t know anything about milli-amperes or volts (except maybe their wall outlet voltage).
Yes. I really wish all batteries used watt-hours. All it’d take would be for someone to design a phone that runs at a different voltage and their battery numbers would stop being comparable.
I disagree. Joules are really hard to understand to laypeople. Watt-hours directly relate to the power of a device without conversion, and can even be really translated in terms of power bill.
3.6 megajoules? Eh, I guess that’s maybe a lot? Or not?
1000 watt-hours? Oh, like running a microwave for a whole hour? Dang that’s a LOT!
It saves an amount of money so minuscule it literally makes no difference.
As for thickness, the iPhone 15 is 7.8 mm thick. You cannot in good faith believe that a 3.5 mm headphone jack can’t fit in it.
That is not what I’m suggesting. I’m not saying charging only cables shouldn’t exist. I’m saying what everything does should be clearer.
There should be a way to make it simpler.
Idk, something like “for USB 4 you NEED all of these”.
Or maybe USB 4 with levels like bronze, silver, etc.
Or make displaying data rate, display and charging capabilities all mandatory on all ports…
I’m not sure what, but “it’s a USB port; look in the manual and if you’re lucky you might learn what it does exactly” ain’t it.
The USB standards are just… Comically overcomplicated. And almost everything about it is optional. They need a full revamp, making it simpler and mandatory on all future ports, devices and cables.
But they won’t do that, will they.
URLs aren’t case-sensitive though, so wouldn’t those necessarily have another kind of differentiator?
We regularly have that problem at work. Works on your development PC on Windows. Push to pipeline, get cryptic error messages. Once we were two people trying to figure it out for half an hour.
Case-sensitive file names. Why.
Maybe do robotics (likely in a simplified way; surely “robots for dummies” is a thing?) and have them make their robots compete in some sort of competition at the end of the year.
I’m not even a competitive person at all, but when our school had us compete on Popsicle stick bridges, I had a ton of fun. Creative projects with a clear, real-world benchmark at the end are really fun.